Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

How to replace the engine oil pressure sensor in the Opel Corsa?

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: Checks and maintenance

In this tutorial, we can see how to replace the engine oil pressure sensor in the Opel Corsa, an extremely simple and fast operation. First of all, make sure that the engine is sufficiently cold, then open the hood and locate the sensor in question, which is located on the front side of the engine, right next to the oil level control rod. Next, disconnect the power connector, unscrew the sensor using a wrench, and remove it from its housing. To install the replacement, simply follow the reverse procedure.


Posted on 21 December 2023 by ScegliAuto



How to replace the oil pressure sensor of the Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) To replace the oil pressure sensor of the Opel Corsa, we start by opening the hood, we go to the left side of the upper engine block, at the bottom,
How to disassemble the oil pressure sensor on the Opel Corsa C
Vauxhall Corsa (2000-2006 / Corsa C) Let's find out in this video the instructions on how to disassemble and replace the engine oil pressure sensor of the Opel Corsa C. First of all, we
How do you replace the oil pressure sensor on the Opel Corsa?
Vauxhall Corsa (2006-2014 / Corsa D) In order to replace the oil pressure sensor on the Opel Corsa, you need to open the hood so that you have access to the components inside the engine

    Frequently Asked Questions

    • Corsa 1993-2000 - Where is the engine starter relay located in the Opel Corsa B? Read Answer
    • Corsa 2006-2014 - Where is the horn located in my Opel Corsa D? Read Answer
    • Corsa 2014-2019 - Where is the external temperature sensor of the 2016 Opel Corsa 1.4? Read Answer
    • Corsa 2006-2014 - What is the tightening torque of the lower oil drain bolt on an Opel Corsa? Read Answer

How to deactivate the safe lock on a Volkswagen Golf.

The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed.

Watch the video!


by ScegliAuto

More videos