Do it yourself
Frequently asked questions about cars and motorcycles

How to Perform the Pedal Check on an Opel Vehicle

Model: Vauxhall Opel Various
Part: Dashboard

In this video, learn how to perform the Pedal Check on an Opel vehicle. This allows you to check which error the vehicle is signalling simply by pressing the pedals: press the brake and accelerator pedals simultaneously, then turn on the ignition. The display will show 'ECN' and highlight the errors until the engine light flashes. Then the mileage will appear, and at that point, the check is complete. For decoding the errors, our presenter recommends an app like Torque Pro - and you will need to connect your OBD11 to the EOBD socket, through which you can clear any errors that appear. After clearing all potential errors, disconnect any sensor to see if it registers the error. Repeat the entire procedure starting from the pedals to check what the vehicle indicates. The vehicle will show exactly what you have caused. Reconnect the sensors, then clear the errors and verify that they have indeed been cleared from the ECU, which has actually happened.

Updated on 12 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Vauxhall Opel Various The reset of the service light on an Opel vehicle is a very simple operation. On Opel Zafira and Opel Astra vehicles to perform the reset we must: - …
Vauxhall Opel Various Today, you will learn how to reset the service light on an Opel Viva vehicle. To perform this operation, press the menu button located on the left si…
Vauxhall Opel Various Error code 89, whether it is on an Opel vehicle or a Chevrolet vehicle, indicates a generic error and the message that may appear along with the code…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos