Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the 2018 Opel Combo

Model: Vauxhall Combo Combo D, MK 4 - Years 2012-2018
Part: Warning light – error code

This video shows how to reset the maintenance light on the Opel Combo. This procedure is very simple and takes about 20 seconds to complete. To perform the reset, insert the key without turning it. Then, press and hold the check button located in the centre of the dashboard. While holding it, turn the key to the first position to start the instrument cluster. At this point, a countdown will appear on the display; wait for it to reach 0, release the button, and restart the dashboard. The procedure is now complete. The light will illuminate when the service is due, either after 12 months or when a certain mileage is approached, as specified by Opel.

Updated on 14 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Opel Combo van?
How to reset the service light on the Opel Combo van?
Vauxhall Combo (2019-2026 / Combo E, MK 5) In this tutorial, you can see how to reset the service light on the Opel Combo van, an extremely simple and quick operation, to be performed only aft…
How to reset the service in an Opel Combo van?
How to reset the service in an Opel Combo van?
Vauxhall Combo (2019-2026 / Combo E, MK 5) In this tutorial, you will see how to reset the service in an Opel Combo van, a very simple and quick operation to perform only after completing all …
How to Reset the Service Light on the Opel Combo
How to Reset the Service Light on the Opel Combo
Vauxhall Combo (2012-2018 / Combo D, MK 4) In today's video, see how to reset the service light on the Opel Combo; this tutorial also applies to the Fiat Doblò of the same era. First, enter yo…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos