Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Opel Antara

Model: Vauxhall Antara MK 1 - Years 2006-2015
Part: Service warning light

This video demonstrates how to reset the maintenance light on the Opel Antara. The procedure is straightforward and takes less than a minute. To perform this procedure, insert the key, press the accelerator pedal fully down, while keeping it pressed, turn on the ignition without starting the engine. Once the ignition is on, release the accelerator pedal and press it three times fully down. At this point, turn off and then turn on the ignition again, and the reset is complete. This procedure does not require any special tools or software.

Updated on 8 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a 2006 Opel Antara
How to Reset the Service Light on a 2006 Opel Antara
Vauxhall Antara (2006-2015 / MK 1) Resetting the service light on a 2006 Opel Antara is a very simple procedure you can do yourself. Before resetting the service light, you need to per…
How do you reset the Service light on the Opel Antara?
How do you reset the Service light on the Opel Antara?
Vauxhall Antara (2006-2015 / MK 1) The procedure for resetting the Service light that appears on the instrument panel of the Opel Antara can be carried out by turning on the instrument…
Resetting the Service Light on the Opel Antara
Resetting the Service Light on the Opel Antara
Vauxhall Antara (2006-2015 / MK 1) Today's guide will show you how to reset the maintenance warning (service) light on the Opel Antara. First, get in the vehicle and turn on the igniti…

Other guides you may be interested in

    Frequently Asked Questions

    • Antara 2006-2015 - What does the oil warning light indicate with the Opel Antara wrench? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos