Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the service light of the Opel Vivaro MK2.

Model: Vauxhall Vivaro MK 2 - Years 2014-2019
Part: Service warning light

To notify us that we are about to reach the mileage set for the engine oil change of the Opel Vivaro, the control system lights up an orange warning light with a wrench in the instrumentation. After replacing the oil, we proceed to reset the control system. We sit in the driver's seat, turn on the ignition, press the buttons at the top of the lever to the right of the steering wheel, select the maintenance interval. Press one of the two buttons until the duration and mileage indication appears, release and press again until the interval with the updated data appears, release the button and turn off the ignition.

Posted on 7 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Opel Vivaro
How to Reset the Service Light on the Opel Vivaro
Vauxhall Vivaro (2019-2026 / Vivaro C, MK 3) Today, you will learn how to reset the service light on the Opel Vivaro independently and for free, without using a diagnostic computer. To reset the…
How to Reset the Service Light on an Opel Vivaro
How to Reset the Service Light on an Opel Vivaro
Vauxhall Vivaro (2014-2019 / MK 2) Here’s how to reset the Service light on the Opel/Vauxhall Vivaro: first, get in the vehicle and close all the doors; also engage the handbrake. Then…
How to Reset the Service Light on an Opel Vivaro?
How to Reset the Service Light on an Opel Vivaro?
Vauxhall Vivaro (2014-2019 / MK 2) To reset the service light on an Opel Vivaro, turn on the instrument cluster by turning the key in the ignition switch: once this is powered on, you …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos