Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the ignition cylinder of the Opel Astra

Model: Vauxhall Astra Astra F - Years 1991-1998

Today's main steps will show us how to disassemble and replace the ignition cylinder of the Opel Astra, following the instructions below. First, we get on board the car and start removing the plastic cover found under the steering wheel; then we remove the steering wheel to access the bottom part of the ignition cylinder, as shown in the video. At this point, we remove the pin that secures the ignition cylinder, removing it and replacing it with the new one; we also replace the key, reassembling everything!

Posted on 10 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Removing the Ignition Switch from an Opel Astra
Removing the Ignition Switch from an Opel Astra
Vauxhall Astra (1998-2006 / Astra G) Remove the ignition cylinder from an Opel Astra, here’s how to proceed. Before removing the ignition switch, disconnect the battery power cables. Uns…
How to Program the Key on the Opel Astra G - Zafira
How to Program the Key on the Opel Astra G - Zafira
Vauxhall Astra (1998-2006 / Astra G) In this guide, we will see how to program the remote for central locking on the Opel Astra G, as well as on the Zafira. First, get inside the vehicle…
Removal of Ignition Barrel
Removal of Ignition Barrel
Vauxhall Astra (1998-2006 / Astra G) To perform this operation, you need the ignition key: first, remove the plastic covers over the light switch controls, detach the controls themselves…

Other guides you may be interested in

    Frequently Asked Questions

    • Astra 2004-2010 - Which fuse affects the starter of an Opel Astra H? Read answer
    • Astra 1998-2006 - Where is the speed sensor located in an Opel Astra G? Read answer

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos