Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 307
    4. : Body

Peugeot 307 - Body

Body Peugeot 307 (2001-2009 / mk 1)

Peugeot 307 (2001-2009 / MK 1)
How to Open a Stuck Bonnet on a Peugeot 307 CC
In this video, you will see how to open the stuck boot of a Peugeot 307, which has a faulty opening motor. This is a 307 Coupé Cabriolet, and it cannot be …Read all…
Posted on 30 August 2026 by ScegliAuto
Peugeot 307 (2001-2009 / MK 1)
Guide to Opening the Bonnet of the Peugeot 307
Discover how to open the bonnet of the Peugeot 307 with this simple guide, following the instructions below. First, get into the vehicle and pull the lever …Read all…
Posted on 26 July 2026 by ScegliAuto
Peugeot 307 (2001-2009 / MK 1)
How to Open the Bonnet of the Peugeot 307
This brief and simple guide provides instructions on how to open the bonnet of the Peugeot 307, as well as the 207 and 206. First, open the driver's side front …Read all…
Posted on 12 July 2026 by ScegliAuto
Peugeot 307 (2001-2009 / MK 1)
How to Open the Bonnet on Peugeot 307
Today, I will show you a task that, although very simple, many do not know: how to open the car's bonnet. This operation is practically the same on almost all …Read all…
Posted on 12 June 2026 by ScegliAuto
Peugeot 307 (2001-2009 / MK 1)
Opening the Front Bonnet on Peugeot 307
Performing maintenance on your Peugeot 307? Here’s how to open the front bonnet for all checks. Pull the lever located at the bottom of the dashboard, then …Read all…
Posted on 8 April 2026 by ScegliAuto
Peugeot 307 (2001-2009 / MK 1)
How to Open the Bonnet of a Peugeot 307
Want to perform maintenance on your car (topping up fluids and changing filters)? Let’s see how to open the engine bonnet on your Peugeot 307. Pull the lever …Read all…
Posted on 30 March 2026 by ScegliAuto
Peugeot 307 (2001-2009 / MK 1)
How to Paint the Plastic Cover of the Boot Lid on a Peugeot 307
The plastic trim covering the upper edge of the boot lid, known as the spoiler, is secured to the body with six pins, two at each end and another two in the …Read all…
Posted on 23 March 2026 by ScegliAuto
Airbag (5) Alternator (4) Speaker (2) Shocks (3) Antenna (3) Air conditioning (3) Car stereo (7) Battery (18) Air vents (3) Transmission (2) Spark plugs (5) Glow plugs (3) Convertible top (4) Body (7) Glove compartment (1) Control unit (3) Key (14) Timing belt (12) V-belt (2) Air conditioner (1) A/C controls (2) Onboard computer (5) Checks and maintenance (35) Dashboard (8) Shifter boot (3) Brake rotors (1) Rear bench seat (1) Headlight (7) Tail light (10) Diesel particulate filter (2) Air filter (13) Cabin air filter (9) Fuel filter (1) Diesel fuel filter (11) Oil filter (1) Parking brake (1) Clutch (3) Fuel injectors (2) Accessory kit (1) Xenon headlight kit (2) Light bulb (3) Side marker bulb (4) Headlight bulb (19) Tail light bulb (13) Interior dome light bulb (7) Antifreeze coolant (1) Instrument panel light (2) License plate light (6) (8) Handle (2) Exhaust muffler (1) Engine (1) Power window motor (2) Starter motor (11) Transmission fluid (2) Engine oil (1) Clock (28) Door trim panel (16) Front bumper (6) Rear bumper (3) Brake pads (6) Shift knob (18) Pump (5) Fuel pump (6) Car door (2) Power window switch (4) Instrument cluster (7) Radiator (6) Heater core (3) Wheel (6) Fuse box (35) Seat (2) Engine coolant temperature sensor (2) Parking sensors (1) Door lock (7) Side mirror (6) Rearview mirror (1) Warning light – error code (9) (1) Tire pressure warning light (1) Service warning light (33) Engine mount (1) Windshield wipers (4) Thermostat (3) Cylinder head (2) Drivetrain (1) Turbocharger (1) Blower motor (10) Side window (4) Steering wheel (2)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos