Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 307
    4. : Brake pads

Peugeot 307 - Brake pads

Peugeot 307 (2001-2009 / MK 1)
Replacement brake pads Peugeot 307
Open the engine compartment hood and place the appropriate support rod. Use a protective cover on the fender to avoid scratches and damage. Unscrew the cap of …read all…
Posted on 28 February 2024 by ScegliAuto
Peugeot 307 (2001-2009 / MK 1)
Replacement of brake pads on Peugeot 307
Do we want to replace the pads of the Peugeot 307? Let's see how the front brake pads are removed. We lift the car on a column bridge up to the desired height, …read all…
Posted on 19 January 2024 by ScegliAuto
Peugeot 307 (2001-2009 / MK 1)
Replacement of the Peugeot 307 pads
Do the brake pads need to be replaced? We disassemble the wheel and replace the pads. We unscrew the locking pin of the brake caliper, remove the same from the …read all…
Posted on 22 December 2023 by ScegliAuto
Peugeot 307 (2001-2009 / MK 1)
How to replace brake pads on a Peugeot 307 cc
Today in this short video we are going to see how to replace the brake pads on our Peugeot 307 cc, with a little effort we will be able to do it ourselves. …read all…
Posted on 28 November 2023 by ScegliAuto
Peugeot 307 (2001-2009 / MK 1)
How to replace Peugeot 307 front brake pads
To replace the brake pads and the front discs, lift the car, remove the front wheel, remove the caliper fixing pins and move it away from its support to …read all…
Posted on 19 October 2023 by ScegliAuto
Peugeot 307 (2001-2009 / MK 1)
Replacement of rear brake pads
This video shows us how to replace the rear brake pads. Once the machine has been raised and the wheel removed with the necessary precautions, we go to …read all…
Posted on 25 July 2023 by ScegliAuto
Airbags (3) Alternator (3) Shock absorbers (2) Antenna (2) Air conditioning (3) Car stereo (4) Battery (11) Air Vents (2) Gearbox (1) Spark plugs (4) Glow plugs (3) Soft top (1) Bodywork (2) Control unit (2) Key (7) Timing belt (10) V-belt (1) Air conditioning (1) Air conditioning controls (2) -board computer (6) Checks and maintenance (46) Dashboard (4) Gearshift gaiter (3) Brake discs (1) Headlight (5) Tail light (5) Particulate filter (2) Air filter (8) Cabin air filter (6) Petrol filter (1) Diesel filter (10) Oil filter (1) Clutch (2) Injectors (1) Accessory Kit (1) Xenon headlight kit (2) Light bulb (1) Side turn signal light bulb (4) Headlight bulb (14) Rear light bulb (5) Interior lights ceiling light bulb (6) Dashboard light (1) License plate light (4) Third brake light (7) Handle (2) Engine (1) Window motor (2) Starter motor (10) Gear oil (2) Engine oil (2) Door panel (11) Front bumper (4) Rear bumper (3) Brake pads (6) Gear Shift Knob (8) Pump (4) Fuel pump (5) Door (1) Window lift button (3) Instrument cluster (10) Radiator (3) Passenger compartment heating radiator (2) Wheel (6) Fuse box (24) Seat (2) Parking sensors (1) Lock (7) Outside rearview mirror (6) Interior rearview mirror (1) Engine mount (1) Windscreen wipers (2) Thermostat (3) Engine head (2) Transmission (1) Interior blower (9) Side window (2) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos