Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 307
    4. : Pump

Peugeot 307 - Pump

Peugeot 307 (2001-2009 / MK 1)
How do you replace the oil pump of the Peugeot 307?
In order to replace the oil pump of the Peugeot 307, you need to lift the car with a jack or a lift so that you have access to the components in the lower part …read all…
Posted on 11 November 2023 by ScegliAuto
Peugeot 307 (2001-2009 / MK 1)
Replace the washer pump on Peugeot 307
Does the windshield washer no longer work on our car? Let's see how to do it. We take the hoods and disconnect the battery terminals. Unscrew the pins under …read all…
Posted on 3 December 2023 by ScegliAuto
Peugeot 307 (2001-2009 / MK 1)
How to remove the glass washer pump on a Peugeot 307
How to disassemble the window washer pump on a Peugeot 307? Let's see carefully how to do it: loosen the pins of the rim, lift the car on a column or jack …read all…
Posted on 1 November 2023 by ScegliAuto
Peugeot 307 (2001-2009 / MK 1)
How to replace the glass washer pump of the Peugeot 307
If it happens that liquid does not come out of the special nozzles while pressing on the control lever of the wiper, it is very likely that the pump may have …read all…
Posted on 2 September 2023 by ScegliAuto
Airbags (3) Alternator (3) Shock absorbers (2) Antenna (2) Air conditioning (3) Car stereo (4) Battery (11) Air Vents (2) Gearbox (1) Spark plugs (4) Glow plugs (3) Soft top (1) Bodywork (2) Control unit (2) Key (7) Timing belt (10) V-belt (1) Air conditioning (1) Air conditioning controls (2) -board computer (6) Checks and maintenance (46) Dashboard (4) Gearshift gaiter (3) Brake discs (1) Headlight (5) Tail light (5) Particulate filter (2) Air filter (8) Cabin air filter (6) Petrol filter (1) Diesel filter (10) Oil filter (1) Clutch (2) Injectors (1) Accessory Kit (1) Xenon headlight kit (2) Light bulb (1) Side turn signal light bulb (4) Headlight bulb (14) Rear light bulb (5) Interior lights ceiling light bulb (6) Dashboard light (1) License plate light (4) Third brake light (7) Handle (2) Engine (1) Window motor (2) Starter motor (10) Gear oil (2) Engine oil (2) Door panel (11) Front bumper (4) Rear bumper (3) Brake pads (6) Gear Shift Knob (8) Pump (4) Fuel pump (5) Door (1) Window lift button (3) Instrument cluster (10) Radiator (3) Passenger compartment heating radiator (2) Wheel (6) Fuse box (24) Seat (2) Parking sensors (1) Lock (7) Outside rearview mirror (6) Interior rearview mirror (1) Engine mount (1) Windscreen wipers (2) Thermostat (3) Engine head (2) Transmission (1) Interior blower (9) Side window (2) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos