Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 307
    4. : Outside rearview mirror

Peugeot 307 - Outside rearview mirror

Peugeot 307 (2001-2009 / MK 1)
How to repair and replace the glass of the rearview mirror of the Peugeot 307.
Today's guide will show us how to repair and replace the glass of the external rearview mirror of the Peugeot 307, following the instructions below. In this …read all…
Posted on 1 February 2024 by ScegliAuto
Peugeot 307 (2001-2009 / MK 1)
How to replace the exterior mirror in the Peugeot 307?
In this tutorial we can see how to replace the external rearview mirror in the Peugeot 307, a very simple and fast operation, which however requires the …read all…
Posted on 26 July 2022 by ScegliAuto
Peugeot 307 (2001-2009 / MK 1)
How to replace the exterior mirror on the Peugeot 307?
In order to replace the external rearview mirror of the Peugeot 307 you have to remove the internal plastic cover, corresponding to the mirror. Subsequently, …read all…
Posted on 5 March 2024 by ScegliAuto
Peugeot 307 (2001-2009 / MK 1)
Removing the Peugeot 307 exterior mirror
Let's see in this video how to remove the exterior rearview mirror of a Peugeot 307, following these simple instructions. First we open the front door and we …read all…
Posted on 1 January 2024 by ScegliAuto
Peugeot 307 (2001-2009 / MK 1)
How to remove the mirror on Peugeot 307
How to remove the mirror on Peugeot 307? Let's see in this video how to remove a passenger side exterior mirror. We disassemble to start the door panel with …read all…
Posted on 18 October 2023 by ScegliAuto
Peugeot 307 (2001-2009 / MK 1)
Replacement exterior rearview mirror
In case of breakage of the mirror of the external rearview mirror, it is possible to replace it by finding the spare part also in the after market; replacement …read all…
Posted on 25 August 2023 by ScegliAuto
Airbags (3) Alternator (3) Shock absorbers (2) Antenna (2) Air conditioning (3) Car stereo (4) Battery (11) Air Vents (2) Gearbox (1) Spark plugs (4) Glow plugs (3) Soft top (1) Bodywork (2) Control unit (2) Key (7) Timing belt (10) V-belt (1) Air conditioning (1) Air conditioning controls (2) -board computer (6) Checks and maintenance (46) Dashboard (4) Gearshift gaiter (3) Brake discs (1) Headlight (5) Tail light (5) Particulate filter (2) Air filter (8) Cabin air filter (6) Petrol filter (1) Diesel filter (10) Oil filter (1) Clutch (2) Injectors (1) Accessory Kit (1) Xenon headlight kit (2) Light bulb (1) Side turn signal light bulb (4) Headlight bulb (14) Rear light bulb (5) Interior lights ceiling light bulb (6) Dashboard light (1) License plate light (4) Third brake light (7) Handle (2) Engine (1) Window motor (2) Starter motor (10) Gear oil (2) Engine oil (2) Door panel (11) Front bumper (4) Rear bumper (3) Brake pads (6) Gear Shift Knob (8) Pump (4) Fuel pump (5) Door (1) Window lift button (3) Instrument cluster (10) Radiator (3) Passenger compartment heating radiator (2) Wheel (6) Fuse box (24) Seat (2) Parking sensors (1) Lock (7) Outside rearview mirror (6) Interior rearview mirror (1) Engine mount (1) Windscreen wipers (2) Thermostat (3) Engine head (2) Transmission (1) Interior blower (9) Side window (2) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos