Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 307
    4. : Tail light

Peugeot 307 - Tail light

Peugeot 307 (2001-2009 / MK 1)
How to disassemble the rear light cluster of a Peugeot 307
We can see through this very short video tutorial all the steps needed to remove the rear light of a first-generation Peugeot 307, a model in production from …read all…
Posted on 3 September 2023 by ScegliAuto
Peugeot 307 (2001-2009 / MK 1)
How to replace the rear lights on a Peugeot 307CC?
In this tutorial, we can see how to replace the rear lights in the Peugeot 307 CC, a very simple operation. Before proceeding, make sure that the key is not …read all…
Posted on 4 May 2023 by ScegliAuto
Peugeot 307 (2001-2009 / MK 1)
Removal of the third stop Peugeot 307
In today's video we will see how to remove the third stop of a Peugeot 307, in simple steps. First we open the boot lid and with a 10 mm wrench we go to …read all…
Posted on 22 March 2024 by ScegliAuto
Peugeot 307 (2001-2009 / MK 1)
Removal of the third rear light of a Peugeot 307
Let's see the disassembly of the third rear light of a Peugeot 307. Remove the plastic cover with a screwdriver (hatch on the inside), unscrew the screws …read all…
Posted on 18 November 2023 by ScegliAuto
Peugeot 307 (2001-2009 / MK 1)
How to remove the rear light of the Peugeot 307
Do you want to remove the rear light of the Peugeot 307 but you don't know how to do it? No problem, let's see how to proceed together: open the rear hood, …read all…
Posted on 24 October 2023 by ScegliAuto
Airbags (3) Alternator (3) Shock absorbers (2) Antenna (2) Air conditioning (3) Car stereo (4) Battery (11) Air Vents (2) Gearbox (1) Spark plugs (4) Glow plugs (3) Soft top (1) Bodywork (2) Control unit (2) Key (7) Timing belt (10) V-belt (1) Air conditioning (1) Air conditioning controls (2) -board computer (6) Checks and maintenance (46) Dashboard (4) Gearshift gaiter (3) Brake discs (1) Headlight (5) Tail light (5) Particulate filter (2) Air filter (8) Cabin air filter (6) Petrol filter (1) Diesel filter (10) Oil filter (1) Clutch (2) Injectors (1) Accessory Kit (1) Xenon headlight kit (2) Light bulb (1) Side turn signal light bulb (4) Headlight bulb (14) Rear light bulb (5) Interior lights ceiling light bulb (6) Dashboard light (1) License plate light (4) Third brake light (7) Handle (2) Engine (1) Window motor (2) Starter motor (10) Gear oil (2) Engine oil (2) Door panel (11) Front bumper (4) Rear bumper (3) Brake pads (6) Gear Shift Knob (8) Pump (4) Fuel pump (5) Door (1) Window lift button (3) Instrument cluster (10) Radiator (3) Passenger compartment heating radiator (2) Wheel (6) Fuse box (24) Seat (2) Parking sensors (1) Lock (7) Outside rearview mirror (6) Interior rearview mirror (1) Engine mount (1) Windscreen wipers (2) Thermostat (3) Engine head (2) Transmission (1) Interior blower (9) Side window (2) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos