Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 307
    4. : Rear light bulb

Peugeot 307 - Rear light bulb

Peugeot 307 (2001-2009 / MK 1)
Replacement of Peugeot 307 rear light bulbs
Open the trunk by lifting the trunk and unscrew the side nut located on the side of the headlight concerned, as shown in the video. Now move the inner boot …read all…
Posted on 29 February 2024 by ScegliAuto
Peugeot 307 (2001-2009 / MK 1)
Removing the rear light bulb Peugeot 307
In the video we will see how to disassemble the rear light and how to remove the burnt out bulb in a Peugeot 307. First we open the boot lid and we go to …read all…
Posted on 25 December 2023 by ScegliAuto
Peugeot 307 (2001-2009 / MK 1)
How to install Peogeot 307 headlight bulbs
How to install the bulbs in the headlight of a Peugeot 307? We disassemble the rear light and replace the bulbs. We open and lift the tailgate of the luggage …read all…
Posted on 19 December 2023 by ScegliAuto
Peugeot 307 (2001-2009 / MK 1)
Replacing the rear light bulb on Peugeot 307
Replacing the rear light bulb on Peugeot 307. Very simple operation, we see in this video how to proceed. We open the bonnet of the luggage compartment, then, …read all…
Posted on 26 November 2023 by ScegliAuto
Peugeot 307 (2001-2009 / MK 1)
How to replace the rear light bulbs on a Peugeot 307
How to replace the rear light bulbs on a Peugeot 307? Very simple operation, we see in this video how to proceed. We open the bonnet of the luggage …read all…
Posted on 26 November 2023 by ScegliAuto
Airbags (3) Alternator (3) Shock absorbers (2) Antenna (2) Air conditioning (3) Car stereo (4) Battery (11) Air Vents (2) Gearbox (1) Spark plugs (4) Glow plugs (3) Soft top (1) Bodywork (2) Control unit (2) Key (7) Timing belt (10) V-belt (1) Air conditioning (1) Air conditioning controls (2) -board computer (6) Checks and maintenance (46) Dashboard (4) Gearshift gaiter (3) Brake discs (1) Headlight (5) Tail light (5) Particulate filter (2) Air filter (8) Cabin air filter (6) Petrol filter (1) Diesel filter (10) Oil filter (1) Clutch (2) Injectors (1) Accessory Kit (1) Xenon headlight kit (2) Light bulb (1) Side turn signal light bulb (4) Headlight bulb (14) Rear light bulb (5) Interior lights ceiling light bulb (6) Dashboard light (1) License plate light (4) Third brake light (7) Handle (2) Engine (1) Window motor (2) Starter motor (10) Gear oil (2) Engine oil (2) Door panel (11) Front bumper (4) Rear bumper (3) Brake pads (6) Gear Shift Knob (8) Pump (4) Fuel pump (5) Door (1) Window lift button (3) Instrument cluster (10) Radiator (3) Passenger compartment heating radiator (2) Wheel (6) Fuse box (24) Seat (2) Parking sensors (1) Lock (7) Outside rearview mirror (6) Interior rearview mirror (1) Engine mount (1) Windscreen wipers (2) Thermostat (3) Engine head (2) Transmission (1) Interior blower (9) Side window (2) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos