Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 307
    4. : Wheel

Peugeot 307 - Wheel

Peugeot 307 (2001-2009 / MK 1)
How to remove and replace the wheel with the spare wheel of the Peugeot 307.
Below we will see the main steps that will allow us to disassemble and replace the wheel with the spare wheel of the Peugeot 307. First, we loosen the wheel …read all…
Posted on 11 November 2023 by ScegliAuto
Peugeot 307 (2001-2009 / MK 1)
How to remove the spare wheel from the Peugeot 307 SW
In today's video tutorial we will see how to remove the spare wheel from its compartment on the Peugeot 307, in the station wagon version. First of all, we …read all…
Posted on 10 May 2024 by ScegliAuto
Peugeot 307 (2001-2009 / MK 1)
How to use the jacks on Peugeot 307
Let's see how to use the wheel removal kit on Peugeot 308. We open the trunk and take the wheel removal kit which includes: jack, jack lever, screwdriver, bolt …read all…
Posted on 4 November 2023 by ScegliAuto
Peugeot 307 (2001-2009 / MK 1)
How to replace the wheel on Peugeot 307
How to replace the wheel on a Peugeot 308. After opening the trunk and taking the wheel removal kit which includes: jack, jack lever, screwdriver, bolt wrench …read all…
Posted on 4 November 2023 by ScegliAuto
Peugeot 307 (2001-2009 / MK 1)
How to remove the spare wheel from the Peugeot 307
What may seem like a simple operation in some cases could prove to be seriously more difficult if you do not know adequately your car or the car in question. …read all…
Posted on 3 October 2023 by ScegliAuto
Peugeot 307 (2001-2009 / MK 1)
How to remove the spare wheel of the Peugeot 307
The idea of placing the spare wheel under the car floor, rather than under the loading surface of the luggage rack, if on the one hand it allows you not to …read all…
Posted on 7 September 2023 by ScegliAuto
Airbags (3) Alternator (3) Shock absorbers (2) Antenna (2) Air conditioning (3) Car stereo (4) Battery (11) Air Vents (2) Gearbox (1) Spark plugs (4) Glow plugs (3) Soft top (1) Bodywork (2) Control unit (2) Key (7) Timing belt (10) V-belt (1) Air conditioning (1) Air conditioning controls (2) -board computer (6) Checks and maintenance (46) Dashboard (4) Gearshift gaiter (3) Brake discs (1) Headlight (5) Tail light (5) Particulate filter (2) Air filter (8) Cabin air filter (6) Petrol filter (1) Diesel filter (10) Oil filter (1) Clutch (2) Injectors (1) Accessory Kit (1) Xenon headlight kit (2) Light bulb (1) Side turn signal light bulb (4) Headlight bulb (14) Rear light bulb (5) Interior lights ceiling light bulb (6) Dashboard light (1) License plate light (4) Third brake light (7) Handle (2) Engine (1) Window motor (2) Starter motor (10) Gear oil (2) Engine oil (2) Door panel (11) Front bumper (4) Rear bumper (3) Brake pads (6) Gear Shift Knob (8) Pump (4) Fuel pump (5) Door (1) Window lift button (3) Instrument cluster (10) Radiator (3) Passenger compartment heating radiator (2) Wheel (6) Fuse box (24) Seat (2) Parking sensors (1) Lock (7) Outside rearview mirror (6) Interior rearview mirror (1) Engine mount (1) Windscreen wipers (2) Thermostat (3) Engine head (2) Transmission (1) Interior blower (9) Side window (2) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos