Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 307
    4. : Third brake light

Peugeot 307 - Third brake light

Peugeot 307 (2001-2009 / MK 1)
How to disassemble the third brake light in the Peugeot 307?
In this tutorial we can see how to disassemble the third brake light in the Peugeot 307, a very simple and fast operation, to be carried out for example in …read all…
Posted on 8 June 2023 by ScegliAuto
Peugeot 307 (2001-2009 / MK 1)
How to replace the third brake light bulbs in the Peugeot 307?
In this tutorial we can see how to replace the third stop light bulbs in the Peugeot 307, a very simple and fast operation. Before doing this, let's make sure …read all…
Posted on 31 October 2022 by ScegliAuto
Peugeot 307 (2001-2009 / MK 1)
Third brake light replacement on Peugeot 307
Open the boot lid and unscrew the two 10 mm nuts that hold the third stop light in place. Once this is done, grab the light from the outside and pull it out of …read all…
Posted on 24 January 2024 by ScegliAuto
Peugeot 307 (2001-2009 / MK 1)
Third brake light replacement on Peugeot 307
Open the boot lid and manually remove the internal protection at the height of the spotlight with the central stop light bulb. If you have difficulty by hand, …read all…
Posted on 23 January 2024 by ScegliAuto
Peugeot 307 (2001-2009 / MK 1)
How to replace the third brake light on a Peugeot 307
Before starting, we will have to open the tailgate of the luggage compartment of our Peugeot 307. So let's start by disengaging and removing the internal cover …read all…
Posted on 22 January 2024 by ScegliAuto
Peugeot 307 (2001-2009 / MK 1)
Replace the third brake light bulb in the Peugeot 307.
Before carrying out any maintenance on a car, we must place the car, itself, on a floor or on the deck, so that we can work on it in safe and stable …read all…
Posted on 26 December 2023 by ScegliAuto
Peugeot 307 (2001-2009 / MK 1)
How to remove third stop Peugeot 307
Damage to the bulbs of the third stop is a fairly frequent defect: in order to replace these bulbs it is first necessary to remove the third stop; therefore …read all…
Posted on 4 September 2023 by ScegliAuto
Airbags (3) Alternator (3) Shock absorbers (2) Antenna (2) Air conditioning (3) Car stereo (4) Battery (11) Air Vents (2) Gearbox (1) Spark plugs (4) Glow plugs (3) Soft top (1) Bodywork (2) Control unit (2) Key (7) Timing belt (10) V-belt (1) Air conditioning (1) Air conditioning controls (2) -board computer (6) Checks and maintenance (46) Dashboard (4) Gearshift gaiter (3) Brake discs (1) Headlight (5) Tail light (5) Particulate filter (2) Air filter (8) Cabin air filter (6) Petrol filter (1) Diesel filter (10) Oil filter (1) Clutch (2) Injectors (1) Accessory Kit (1) Xenon headlight kit (2) Light bulb (1) Side turn signal light bulb (4) Headlight bulb (14) Rear light bulb (5) Interior lights ceiling light bulb (6) Dashboard light (1) License plate light (4) Third brake light (7) Handle (2) Engine (1) Window motor (2) Starter motor (10) Gear oil (2) Engine oil (2) Door panel (11) Front bumper (4) Rear bumper (3) Brake pads (6) Gear Shift Knob (8) Pump (4) Fuel pump (5) Door (1) Window lift button (3) Instrument cluster (10) Radiator (3) Passenger compartment heating radiator (2) Wheel (6) Fuse box (24) Seat (2) Parking sensors (1) Lock (7) Outside rearview mirror (6) Interior rearview mirror (1) Engine mount (1) Windscreen wipers (2) Thermostat (3) Engine head (2) Transmission (1) Interior blower (9) Side window (2) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos