Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 307
    4. : Headlight

Peugeot 307 - Headlight

Peugeot 307 (2001-2009 / MK 1)
Removing the front light on the Peugeot 307
In this video tutorial we will see how to remove and replace the front light on the Peugeot 307 first series, following these simple and quick steps. First we …read all…
Posted on 4 March 2024 by ScegliAuto
Peugeot 307 (2001-2009 / MK 1)
Removing the bumper and headlight on Peugeot 307
With a small flat screwdriver remove the round clips that secure the bumper at the top. Remove the wheel arches and unscrew the side bolts of the same bumper, …read all…
Posted on 23 January 2024 by ScegliAuto
Peugeot 307 (2001-2009 / MK 1)
Removing the front headlight Peugeot 307 - 307 SW
Let's see how to remove and replace the headlight and its bulbs on a Peugeot 307 and 307 SW. First of all we open the bonnet of our car and remove the plastic …read all…
Posted on 10 January 2024 by ScegliAuto
Peugeot 307 (2001-2009 / MK 1)
Removing the front headlight Peugeot 307
In this video tutorial we will show you how to remove the front headlight of the Peugeot 307. First we open the bonnet of our car and remove the clips of the …read all…
Posted on 9 December 2023 by ScegliAuto
Peugeot 307 (2001-2009 / MK 1)
How to remove the headlight of a Peugeot 307
Let's see how to remove the front headlight of a Peugeot 307: open the bonnet by pulling the hood opening lever and put it in safety; we remove the fastening …read all…
Posted on 1 November 2023 by ScegliAuto
Airbags (3) Alternator (3) Shock absorbers (2) Antenna (2) Air conditioning (3) Car stereo (4) Battery (11) Air Vents (2) Gearbox (1) Spark plugs (4) Glow plugs (3) Soft top (1) Bodywork (2) Control unit (2) Key (7) Timing belt (10) V-belt (1) Air conditioning (1) Air conditioning controls (2) -board computer (6) Checks and maintenance (46) Dashboard (4) Gearshift gaiter (3) Brake discs (1) Headlight (5) Tail light (5) Particulate filter (2) Air filter (8) Cabin air filter (6) Petrol filter (1) Diesel filter (10) Oil filter (1) Clutch (2) Injectors (1) Accessory Kit (1) Xenon headlight kit (2) Light bulb (1) Side turn signal light bulb (4) Headlight bulb (14) Rear light bulb (5) Interior lights ceiling light bulb (6) Dashboard light (1) License plate light (4) Third brake light (7) Handle (2) Engine (1) Window motor (2) Starter motor (10) Gear oil (2) Engine oil (2) Door panel (11) Front bumper (4) Rear bumper (3) Brake pads (6) Gear Shift Knob (8) Pump (4) Fuel pump (5) Door (1) Window lift button (3) Instrument cluster (10) Radiator (3) Passenger compartment heating radiator (2) Wheel (6) Fuse box (24) Seat (2) Parking sensors (1) Lock (7) Outside rearview mirror (6) Interior rearview mirror (1) Engine mount (1) Windscreen wipers (2) Thermostat (3) Engine head (2) Transmission (1) Interior blower (9) Side window (2) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos