Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 307
    4. : -board computer

Peugeot 307 - -board computer

Peugeot 307 (2001-2009 / MK 1)
How to set the clock of the Peugeot 307 without the original radio
In this article we will see how to adjust the clock of the Peugeot 307 in case the car radio installed is not original. To adjust the time, we must first start …read all…
Posted on 15 May 2024 by ScegliAuto
Peugeot 307 (2001-2009 / MK 1)
Where are the fuses for the multifunction display of the Peugeot 307 located?
In this video, we can see where the fuses of the multifunction display of the Peugeot 307 are located, which are the first elements to check in case of sudden …read all…
Posted on 25 July 2023 by ScegliAuto
Peugeot 307 (2001-2009 / MK 1)
How to manually set the time of the Peugeot 307
If you want to manually change the system time shown on the central display of your Peugeot 307 (year 2001-2009) just follow this simple procedure. First, go …read all…
Posted on 2 June 2023 by ScegliAuto
Peugeot 307 (2001-2009 / MK 1)
How to disassemble the display in the Peugeot 307?
As we can see in this tutorial, disassembling the multifunction display in the Peugeot 307 is an extremely simple and fast operation. To do this, we will not …read all…
Posted on 24 September 2022 by ScegliAuto
Peugeot 307 (2001-2009 / MK 1)
How to reset the service warning light of the Peugeot 307
To reset the orange service warning light, proceed as follows: open the driver's side door and access the driver's seat. On the dashboard, locate the button on …read all…
Posted on 21 April 2024 by ScegliAuto
Peugeot 307 (2001-2009 / MK 1)
How to disassemble the on-board computer of a Peugeot 307
Let's see in this video how to remove the on-board computer of a Peugeot 307 located in the upper part of the dashboard. With a plastic lever or screwdriver, …read all…
Posted on 9 October 2023 by ScegliAuto
Airbags (3) Alternator (3) Shock absorbers (2) Antenna (2) Air conditioning (3) Car stereo (4) Battery (11) Air Vents (2) Gearbox (1) Spark plugs (4) Glow plugs (3) Soft top (1) Bodywork (2) Control unit (2) Key (7) Timing belt (10) V-belt (1) Air conditioning (1) Air conditioning controls (2) -board computer (6) Checks and maintenance (46) Dashboard (4) Gearshift gaiter (3) Brake discs (1) Headlight (5) Tail light (5) Particulate filter (2) Air filter (8) Cabin air filter (6) Petrol filter (1) Diesel filter (10) Oil filter (1) Clutch (2) Injectors (1) Accessory Kit (1) Xenon headlight kit (2) Light bulb (1) Side turn signal light bulb (4) Headlight bulb (14) Rear light bulb (5) Interior lights ceiling light bulb (6) Dashboard light (1) License plate light (4) Third brake light (7) Handle (2) Engine (1) Window motor (2) Starter motor (10) Gear oil (2) Engine oil (2) Door panel (11) Front bumper (4) Rear bumper (3) Brake pads (6) Gear Shift Knob (8) Pump (4) Fuel pump (5) Door (1) Window lift button (3) Instrument cluster (10) Radiator (3) Passenger compartment heating radiator (2) Wheel (6) Fuse box (24) Seat (2) Parking sensors (1) Lock (7) Outside rearview mirror (6) Interior rearview mirror (1) Engine mount (1) Windscreen wipers (2) Thermostat (3) Engine head (2) Transmission (1) Interior blower (9) Side window (2) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos