Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 406
    4. : Parking brake

Peugeot 406 - Parking brake

Parking Brake Peugeot 406 (1995-2005 / mk 1)

Peugeot 406 (1995-2005 / MK 1)
Instructions for Replacing Handbrake Cable
To replace the handbrake cable, first remove the central tunnel cover; once the cover is off, disconnect the cable from the handbrake lever and pass it through …Read all…
Posted on 27 February 2026 by ScegliAuto
Airbag (1) Alternator (1) Shocks (1) Antenna (1) Air conditioning (1) Car stereo (2) Ignition coil (1) Air vents (1) Control arm (2) Transmission (2) Body (3) Glove compartment (1) Control unit (1) Key (2) Timing belt (5) Onboard computer (1) Checks and maintenance (4) Dashboard (3) Bearing (2) Air filter (2) Cabin air filter (4) Parking brake (1) Clutch (4) Fuel injectors (1) Window switch (2) Accessory kit (1) Light bulb (1) Headlight bulb (1) Instrument panel light (1) License plate light (1) Exhaust muffler (1) Starter motor (2) Engine oil (2) Door trim panel (3) Front bumper (3) Rear bumper (2) Brake pads (2) Pump (1) Fuel pump (3) Car door (2) Push button (2) Instrument cluster (2) Heater core (1) Fuse box (6) Seat (3) Brake system (1) Suspension system (2) Side mirror (2) Warning light – error code (2) Service warning light (4) Brake drums and shoes (1) Windshield wipers (2) Thermostat (1) Cylinder head (1) Drivetrain (1) Valve (1) Blower motor (2) Side window (1)

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos