Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 406
    4. : Cylinder head

Peugeot 406 - Cylinder head

Cylinder Head Peugeot 406 (1995-2005 / mk 1)

Peugeot 406 (1995-2005 / MK 1)
Replacement of the Engine Valve Cover Gasket
Start by removing all elements above the engine to facilitate the disassembly of the valve cover. Remove the protective caps from the bolts on the cylinder …Read all…
Posted on 12 February 2026 by ScegliAuto
Airbag (1) Alternator (1) Shocks (1) Antenna (1) Air conditioning (1) Car stereo (2) Ignition coil (1) Air vents (1) Control arm (2) Transmission (2) Body (3) Glove compartment (1) Control unit (1) Key (2) Timing belt (5) Onboard computer (1) Checks and maintenance (4) Dashboard (3) Bearing (2) Air filter (2) Cabin air filter (4) Parking brake (1) Clutch (4) Fuel injectors (1) Window switch (2) Accessory kit (1) Light bulb (1) Headlight bulb (1) Instrument panel light (1) License plate light (1) Exhaust muffler (1) Starter motor (2) Engine oil (2) Door trim panel (3) Front bumper (3) Rear bumper (2) Brake pads (2) Pump (1) Fuel pump (3) Car door (2) Push button (2) Instrument cluster (2) Heater core (1) Fuse box (7) Seat (3) Brake system (1) Suspension system (2) Side mirror (2) Warning light – error code (2) Service warning light (5) Brake drums and shoes (1) Windshield wipers (2) Thermostat (1) Cylinder head (1) Drivetrain (1) Valve (1) Blower motor (2) Side window (1)

How to Replace the Starter Motor on an Opel Corsa?

In this tutorial, you will see how to replace the starter motor on an Opel Corsa C, a relatively simple task if you have good manual skills. First, open the bonnet, then disconnect the negative terminal of the battery to work safely. Next, locate the device at the rear of the engine, remove the intake manifold, and unscrew the two nuts from the power terminals. At this point, you can unscrew the mounting bolts of the starter motor, separate it from the engine, and install the replacement by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos