Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 406
    4. : Window lift switch

Peugeot 406 - Window lift switch

Peugeot 406 (1995-2005 / MK 1)
Window lifter button repair
If, while pressing on the keys of the window lifter, the windows remain immobile or are activated only after repeated attempts, it is likely that there is a …read all…
Posted on 23 August 2023 by ScegliAuto
Peugeot 406 (1995-2005 / MK 1)
Car window regulator push-button replacement
The following guide shows in a simple way how to change the car window control panel, avoiding taking the car to the mechanic and thus saving some money. The …read all…
Posted on 21 August 2023 by ScegliAuto
Airbags (2) Alternator (1) Shock absorbers (1) Antenna (1) Air conditioning (1) Car stereo (1) Coil (1) Arm (2) Gearbox (2) Bodywork (2) Glove box (1) Control unit (1) Key (2) Timing belt (4) -board computer (2) Checks and maintenance (3) Dashboard (3) Bearing (2) Air filter (1) Cabin air filter (4) Hand brake (1) Clutch (3) Injectors (1) Window lift switch (2) Accessory Kit (1) Light bulb (1) Dashboard light (1) License plate light (1) Muffler (1) Starter motor (2) Engine oil (2) Door panel (2) Front bumper (1) Rear bumper (2) Brake pads (2) Fuel pump (3) Door (3) Push button (2) Instrument cluster (3) Passenger compartment heating radiator (1) Fuse box (4) Seat (3) Brake system (1) Suspensions (2) Outside rearview mirror (2) Drums and shoes (1) Windscreen wipers (1) Thermostat (1) Engine head (1) Transmission (1) Valve (1) Interior blower (2) Side window (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos