Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 406
    4. : Rear bumper

Peugeot 406 - Rear bumper

Rear Bumper Peugeot 406 (1995-2005 / mk 1)

Peugeot 406 (1995-2005 / MK 1)
How to Remove the Rear Bumper on the Peugeot 406 Coupé?
In the second part of this tutorial, see how to remove the rear bumper on the Peugeot 406 Coupé, a very simple and quick operation. First, open the boot lid, …Read all…
Posted on 29 August 2026 by ScegliAuto
Peugeot 406 (1995-2005 / MK 1)
Instructions for Removing the Rear Bumper
To remove the rear bumper more easily, lift the vehicle on suitable axle stands and remove the rear wheels; then proceed to detach the wheel arch liners and …Read all…
Posted on 15 February 2026 by ScegliAuto
Airbag (1) Alternator (1) Shocks (1) Antenna (1) Air conditioning (1) Car stereo (2) Ignition coil (1) Air vents (1) Control arm (2) Transmission (2) Body (3) Glove compartment (1) Control unit (1) Key (2) Timing belt (5) Onboard computer (1) Checks and maintenance (4) Dashboard (3) Bearing (2) Air filter (2) Cabin air filter (4) Parking brake (1) Clutch (4) Fuel injectors (1) Window switch (2) Accessory kit (1) Light bulb (1) Headlight bulb (1) Instrument panel light (1) License plate light (1) Exhaust muffler (1) Starter motor (2) Engine oil (2) Door trim panel (3) Front bumper (3) Rear bumper (2) Brake pads (2) Pump (1) Fuel pump (3) Car door (2) Push button (2) Instrument cluster (2) Heater core (1) Fuse box (7) Seat (3) Brake system (1) Suspension system (2) Side mirror (2) Warning light – error code (2) Service warning light (5) Brake drums and shoes (1) Windshield wipers (2) Thermostat (1) Cylinder head (1) Drivetrain (1) Valve (1) Blower motor (2) Side window (1)

How to Replace the Starter Motor on an Opel Corsa?

In this tutorial, you will see how to replace the starter motor on an Opel Corsa C, a relatively simple task if you have good manual skills. First, open the bonnet, then disconnect the negative terminal of the battery to work safely. Next, locate the device at the rear of the engine, remove the intake manifold, and unscrew the two nuts from the power terminals. At this point, you can unscrew the mounting bolts of the starter motor, separate it from the engine, and install the replacement by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos