Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 406
    4. : Timing belt

Peugeot 406 - Timing belt

Peugeot 406 (1995-2005 / MK 1)
When and how to replace the timing belt of the Peugeot 406 V6
Let's find out in this guide how and when to replace the timing belt of the Peugeot 406, with V6 Diesel engine. The timing belt, for this type of engine, must …read all…
Posted on 21 April 2024 by ScegliAuto
Peugeot 406 (1995-2005 / MK 1)
How to replace the timing belt on Peugeot 406
Let's see how to replace the timing belt on a Peugeot 406. We lift the car on a column or jack bridge and remove the front wheel with a screwdriver (the right …read all…
Posted on 23 October 2023 by ScegliAuto
Peugeot 406 (1995-2005 / MK 1)
Timing belt replacement
Access the engine compartment and disconnect the negative pole of the battery; then remove the air filter container, the plastic engine cover and the starter …read all…
Posted on 12 July 2023 by ScegliAuto
Peugeot 406 (1995-2005 / MK 1)
Belt and belt tensioner replacement
Get the replacement belts, loosen the wheel nuts and lift the car to secure it. Unscrew the bolts and remove the wheel, brake, mudguard and casing. Remove the …read all…
Posted on 6 July 2023 by ScegliAuto
Airbags (2) Alternator (1) Shock absorbers (1) Antenna (1) Air conditioning (1) Car stereo (1) Coil (1) Arm (2) Gearbox (2) Bodywork (2) Glove box (1) Control unit (1) Key (2) Timing belt (4) -board computer (2) Checks and maintenance (3) Dashboard (3) Bearing (2) Air filter (1) Cabin air filter (4) Hand brake (1) Clutch (3) Injectors (1) Window lift switch (2) Accessory Kit (1) Light bulb (1) Dashboard light (1) License plate light (1) Muffler (1) Starter motor (2) Engine oil (2) Door panel (2) Front bumper (1) Rear bumper (2) Brake pads (2) Fuel pump (3) Door (3) Push button (2) Instrument cluster (3) Passenger compartment heating radiator (1) Fuse box (4) Seat (3) Brake system (1) Suspensions (2) Outside rearview mirror (2) Drums and shoes (1) Windscreen wipers (1) Thermostat (1) Engine head (1) Transmission (1) Valve (1) Interior blower (2) Side window (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos