Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 406
    4. : Cabin air filter

Peugeot 406 - Cabin air filter

Peugeot 406 (1995-2005 / MK 1)
How to replace the pollen filter on a Peugeot 406.
In this video tutorial, we can see how it is possible to replace the pollen filter on a Peugeot 406, following a few simple steps that will guide you towards …read all…
Posted on 13 May 2023 by ScegliAuto
Peugeot 406 (1995-2005 / MK 1)
How to replace the cabin air filter of our car
Replacing the filter is an operation that must be done periodically and is essential for the health of the driver and passengers as this filter allows you to …read all…
Posted on 10 September 2023 by ScegliAuto
Peugeot 406 (1995-2005 / MK 1)
Cabin air filter replacement
The passenger compartment air filter is not located inside but on the outside of the car, exactly under the windshield, on the driver's side: in order to carry …read all…
Posted on 8 September 2023 by ScegliAuto
Peugeot 406 (1995-2005 / MK 1)
Cabin air filter replacement
The cabin air filter seat of the car model in question is located externally, immediately under the windscreen, on the passenger side; then open the front …read all…
Posted on 27 August 2023 by ScegliAuto
Airbags (2) Alternator (1) Shock absorbers (1) Antenna (1) Air conditioning (1) Car stereo (1) Coil (1) Arm (2) Gearbox (2) Bodywork (2) Glove box (1) Control unit (1) Key (2) Timing belt (4) -board computer (2) Checks and maintenance (3) Dashboard (3) Bearing (2) Air filter (1) Cabin air filter (4) Hand brake (1) Clutch (3) Injectors (1) Window lift switch (2) Accessory Kit (1) Light bulb (1) Dashboard light (1) License plate light (1) Muffler (1) Starter motor (2) Engine oil (2) Door panel (2) Front bumper (1) Rear bumper (2) Brake pads (2) Fuel pump (3) Door (3) Push button (2) Instrument cluster (3) Passenger compartment heating radiator (1) Fuse box (4) Seat (3) Brake system (1) Suspensions (2) Outside rearview mirror (2) Drums and shoes (1) Windscreen wipers (1) Thermostat (1) Engine head (1) Transmission (1) Valve (1) Interior blower (2) Side window (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos