Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 406
    4. : Instrument panel light

Peugeot 406 - Instrument panel light

Instrument Panel Light Peugeot 406 (1995-2005 / mk 1)

Peugeot 406 (1995-2005 / MK 1)
Replacing Dashboard Light Bulbs
Replacing the backlighting lights of the climate control display is very simple. Using a small flathead screwdriver, detach the caps located on the sides of …Read all…
Posted on 15 February 2026 by ScegliAuto
Airbag (1) Alternator (1) Shocks (1) Antenna (1) Air conditioning (1) Car stereo (2) Ignition coil (1) Air vents (1) Control arm (2) Transmission (2) Body (3) Glove compartment (1) Control unit (1) Key (2) Timing belt (5) Onboard computer (1) Checks and maintenance (4) Dashboard (3) Bearing (2) Air filter (2) Cabin air filter (4) Parking brake (1) Clutch (4) Fuel injectors (1) Window switch (2) Accessory kit (1) Light bulb (1) Headlight bulb (1) Instrument panel light (1) License plate light (1) Exhaust muffler (1) Starter motor (2) Engine oil (2) Door trim panel (3) Front bumper (3) Rear bumper (2) Brake pads (2) Pump (1) Fuel pump (3) Car door (2) Push button (2) Instrument cluster (2) Heater core (1) Fuse box (6) Seat (3) Brake system (1) Suspension system (2) Side mirror (2) Warning light – error code (2) Service warning light (4) Brake drums and shoes (1) Windshield wipers (2) Thermostat (1) Cylinder head (1) Drivetrain (1) Valve (1) Blower motor (2) Side window (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos