Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 406
    4. : Fuse box

Peugeot 406 - Fuse box

Fuse Box Peugeot 406 (1995-2005 / mk 1)

Peugeot 406 (1995-2005 / MK 1)
Fuse Diagram for a Peugeot 406
In this very short tutorial video, all the fuse and relay diagrams are shown, divided into two specific types, for a Peugeot 406, a specific model produced …Read all…
Posted on 6 February 2026 by ScegliAuto
Peugeot 406 (1995-2005 / MK 1)
Where is the fuse for the cigarette lighter socket of the Peugeot 406 located?
In case of malfunctioning of the cigarette lighter socket of the Peugeot 406, it is necessary to check the corresponding fuses before replacing the socket. The …Read all…
Posted on 2 June 2024 by ScegliAuto
Peugeot 406 (1995-2005 / MK 1)
Location of the Fuse Box on a Peugeot 406
In this video, we often see that the sudden failure of an electrical component in the Peugeot 406 is due to the relevant fuse protecting it. To check this, it …Read all…
Posted on 28 September 2026 by ScegliAuto
Peugeot 406 (1995-2005 / MK 1)
Where are the Fuses on a Peugeot 406?
All the fuses in the Peugeot 406 are contained within dedicated fuse boxes, of which this model has two. The first is located in the lower left part of the …Read all…
Posted on 24 July 2026 by ScegliAuto
Peugeot 406 (1995-2005 / MK 1)
Fuse Diagram for the Peugeot 406
On this model of vehicle, there are two fuse boxes. The first is located in the cabin on the left side of the dashboard, while the second fuse box is …Read all…
Posted on 25 July 2026 by ScegliAuto
Peugeot 406 (1995-2005 / MK 1)
Where to Find the Fuse Box of the Peugeot 406
Knowing the exact location of the fuse box in your Peugeot 406 is very important so you can quickly and effectively address one or more electrical components …Read all…
Posted on 3 July 2026 by ScegliAuto
Airbag (1) Alternator (1) Shocks (1) Antenna (1) Air conditioning (1) Car stereo (2) Ignition coil (1) Air vents (1) Control arm (2) Transmission (2) Body (3) Glove compartment (1) Control unit (1) Key (2) Timing belt (5) Onboard computer (1) Checks and maintenance (4) Dashboard (3) Bearing (2) Air filter (2) Cabin air filter (4) Parking brake (1) Clutch (4) Fuel injectors (1) Window switch (2) Accessory kit (1) Light bulb (1) Headlight bulb (1) Instrument panel light (1) License plate light (1) Exhaust muffler (1) Starter motor (2) Engine oil (2) Door trim panel (3) Front bumper (3) Rear bumper (2) Brake pads (2) Pump (1) Fuel pump (3) Car door (2) Push button (2) Instrument cluster (2) Heater core (1) Fuse box (6) Seat (3) Brake system (1) Suspension system (2) Side mirror (2) Warning light – error code (2) Service warning light (5) Brake drums and shoes (1) Windshield wipers (2) Thermostat (1) Cylinder head (1) Drivetrain (1) Valve (1) Blower motor (2) Side window (1)

What Could Cause the Smart Instrument Cluster to Show Three Lines

When the instrument cluster of the Smart shows three lines, it indicates that there are issues with the gearbox and it cannot engage; otherwise, an "N" would appear. To diagnose the problem, you need to obtain an OBDII reader, which can easily be found on any e-commerce platform for a few pounds. The most common cause of failure is damaged wiring from the controller to the gearbox engine connector. These wires may touch the intercooler housing, leading to abrasions, possibly a frayed wire. The video also shows wires touching each other, which can create issues; there may be a damaged sensor, or the problem could be with the gearbox motor. Often, it is the moisture that damages the wiring.

Watch the video!


by ScegliAuto

More videos