Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 406
    4. : Where is the fuse box of the Peugeot 406

Peugeot 406 - Video tutorial

Model: Peugeot 406 MK 1 - Years 1995-2005
Part: Fuse box
Operation: Where is the fuse box of the Peugeot 406

Knowing the exact position of the fuse box in your Peugeot 406 is very important so that you can intervene quickly and specifically on one or more of the car's electrical components. Before proceeding, we remind you that any maintenance and / or replacement of the fuses must be carried out with the engine off and preferably with the battery disconnected in order to guarantee the maximum possible safety. Go inside the car (driver's side) and locate the compartment located under the steering wheel. Remove the protective cover and immediately behind you will finally have access to the fuses.


Posted on 20 April 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 406 1995-2005 - Where is the fuse box of the Peugeot 406 located? Read Answer
    • 406 1995-2005 - Where are the fuses of the Peugeot 406 located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos