Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 406
    4. : Suspensions

Peugeot 406 - Suspensions

Peugeot 406 (1995-2005 / MK 1)
Replacement swinging arm head suspension
To be able to carry out this repair it is first of all necessary to have the appropriate equipment, that is the fork extractor to unhook the eye of the …read all…
Posted on 29 August 2023 by ScegliAuto
Peugeot 406 (1995-2005 / MK 1)
Shock absorber support bearing replacement
Raise the car on suitable car stands and remove the front wheel; remove oxidation residues with an iron brush and spray unlocking spray on the pins and nuts …read all…
Posted on 19 August 2023 by ScegliAuto
Airbags (2) Alternator (1) Shock absorbers (1) Antenna (1) Air conditioning (1) Car stereo (1) Coil (1) Arm (2) Gearbox (2) Bodywork (2) Glove box (1) Control unit (1) Key (2) Timing belt (4) -board computer (2) Checks and maintenance (3) Dashboard (3) Bearing (2) Air filter (1) Cabin air filter (4) Hand brake (1) Clutch (3) Injectors (1) Window lift switch (2) Accessory Kit (1) Light bulb (1) Dashboard light (1) License plate light (1) Muffler (1) Starter motor (2) Engine oil (2) Door panel (2) Front bumper (1) Rear bumper (2) Brake pads (2) Fuel pump (3) Door (3) Push button (2) Instrument cluster (3) Passenger compartment heating radiator (1) Fuse box (4) Seat (3) Brake system (1) Suspensions (2) Outside rearview mirror (2) Drums and shoes (1) Windscreen wipers (1) Thermostat (1) Engine head (1) Transmission (1) Valve (1) Interior blower (2) Side window (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos