Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Engine Valve Cover Gasket

Model: Peugeot 406 MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Cylinder head

Video tutorial

Start by removing all elements above the engine to facilitate the disassembly of the valve cover. Remove the protective caps from the bolts on the cylinder head and undo the nuts.

Open the oil filler cap and remove the plastic covers. Lift the retainers of the spark plug connectors and remove the wiring harness.

Also, remove all spark plug connectors and their mounting bracket. Undo all the bolts of the valve cover and gently remove it. Carefully remove the gasket from the cover and install the new one, ensuring it adheres perfectly.

Refit the cover, ensuring it fits snugly against the cylinder head. Tighten all the bolts and reconnect the spark plug connectors.


Updated on 8 February 2026 by ScegliAuto


Related tutorials

Engine Check with Oil and Filter Change
Engine Check with Oil and Filter Change
Peugeot 406 (1995-2005 / MK 1) Remove the engine cover. Lift the front of the car and secure it. For the oil change, place a bowl under the sump and unscrew the cap to let the oil …
Removal of the Windscreen Side Seal
Removal of the Windscreen Side Seal
Peugeot 406 (1995-2005 / MK 1) The side seal of the windscreen actually runs from the bottom edge of the glass to the inside of the rear door, along the roof. In addition to being …
Oil and Oil Filter, Fuel Filter, and Cabin Filter Replacement
Oil and Oil Filter, Fuel Filter, and Cabin Filter Replacement
Peugeot 406 (1995-2005 / MK 1) Open the front bonnet and ensure it is securely supported. Unscrew the fastening nuts of the engine cover and remove it. Lift the vehicle on appropri…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos