Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal of the Windscreen Side Seal

Model: Peugeot 406 MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Body

Video tutorial

The side seal of the windscreen actually runs from the bottom edge of the glass to the inside of the rear door, along the roof. In addition to being wedged along the bodywork, it is secured with torx screws located beneath the lip of the seal along the windscreen pillar.

Lift the lip of the seal, unscrew the torx screws, and remove the seal by pulling it out of its housing. If reinstalling, it is recommended to clean it thoroughly and spray silicone spray to protect the rubber from aging.


Updated on 9 February 2026 by ScegliAuto


Related tutorials

Replacement of the Engine Valve Cover Gasket
Replacement of the Engine Valve Cover Gasket
Peugeot 406 (1995-2005 / MK 1) Start by removing all elements above the engine to facilitate the disassembly of the valve cover. Remove the protective caps from the bolts on the cy…
How to Replace the Window Regulator on the Peugeot 406?
How to Replace the Window Regulator on the Peugeot 406?
Peugeot 406 (1995-2005 / MK 1) In this tutorial, you will see how to replace the window regulator on the Peugeot 406, a very simple operation. First, ensure that the key is not ins…
Dismantling the Cabin Heater Radiator
Dismantling the Cabin Heater Radiator
Peugeot 406 (1995-2005 / MK 1) The internal radiator for the cabin heater is located behind the centre console: to access it, first remove the glove compartment from the passenger …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos