Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. 406
  6. : Engine control with oil change and filters

Peugeot 406 - Video tutorial

Model: Peugeot 406 MK 1 - Years 1995-2005
Part: Engine oil
Operation: Engine control with oil change and filters

Remove the engine cover. Raise the car at the front and secure it. To change the oil, place a pan under the engine sump and unscrew the cap to drain the oil. Using a screwdriver and hammer, pierce the oil filter and remove it from its seat. Replace the gasket and close the oil cap. Clean thoroughly, grease the gasket of the new filter and put it back in its seat. Remove the cap from the engine head and top up with new oil in the quantity prescribed by the manufacturer and check the level. To change the fuel filter disconnect the connector and with the help of a screwdriver and hammer force the opening by unscrewing it anticlockwise. Remove the cover and take out the filter. Place the new filter and close the lid by reconnecting the connector. Start the engine. To replace the air filter, unscrew the filter cover, remove the filter, start the engine and spray EGR liquid into the intake duct at intervals. Install a new filter and close the cover. To replace the pollen filter, open the air intakes compartment under the windscreen, remove the filter and put a new one back on.


Posted on 23 June 2023 by ScegliAuto



Engine oil and all filters replaced
Peugeot 406 (1995-2005 / MK 1) Open the front hood and make sure it is supported safely. Loosen the 4 fixing nuts of the engine cover and remove it. Lift the car and place it on tw
Oil and engine oil filter replacement, air, diesel and passenger compartment filter
Peugeot 406 (1995-2005 / MK 1) Open the front hood to make sure that it is supported safely. Unscrew the fixing nuts of the engine cover and remove it. Raise the car on suitable ca
Clutch replacement instructions
Peugeot 406 (1995-2005 / MK 1) This maintenance requires good knowledge of general mechanics and also of specific equipment in order to carry out the installation correctly. The cl

Other guides that may interest you

How do you open the fuel flap of the Volkswagen Golf 5?

In order to open the fuel flap of the Volkswagen Golf 5, you need to press the appropriate button inside the passenger compartment, which is located in the rear part of the glove box on the driver's door. By pressing the button, the flap will unlock and it will then be possible to open it manually. Once the flap has been opened, the fuel tank access cap must be unscrewed. To close everything again, it will be sufficient to screw the tank cap again; subsequently, the flap must also be closed, pressing it so that it fits thanks to its locking mechanism.

Watch the video!


by ScegliAuto

More videos