Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Accelerator Position Sensor

Model: Peugeot 406 MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Valve

Video tutorial

The accelerator position sensor is integrated into the accelerator mechanism itself. To remove it, first disconnect the sensor plug, then the accelerator cable, and then access the relay box located under the accelerator mechanism.

At this point, you can proceed to remove the fixing pins of the support bracket of the accelerator mechanism, which, as mentioned, contains the position sensor. Usually, this type of replacement is also available in the aftermarket as a repair kit that allows you to solve the problem at a low cost.


Updated on 9 February 2026 by ScegliAuto


Related tutorials

Instructions for Dismantling Dashboard Elements
Instructions for Dismantling Dashboard Elements
Peugeot 406 (1995-2005 / MK 1) The first operation is to remove the plastic covers of the light switch controls: unscrew the fixing screws and separate the two covers; then remove …
Disassembly of the Cabin Ventilation Unit
Disassembly of the Cabin Ventilation Unit
Peugeot 406 (1995-2005 / MK 1) This video illustrates the various stages of disassembly (first from the car and then in each individual part) of the cabin ventilation and heating u…
Removal of Roof Pillar Trim
Removal of Roof Pillar Trim
Peugeot 406 (1995-2005 / MK 1) The removal process is very simple and easy. The trim is held in place by four simple plastic clips. Using your hands or a special plastic tool, pry …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos