Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal of Roof Pillar Trim

Model: Peugeot 406 MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Dashboard

Video tutorial

The removal process is very simple and easy. The trim is held in place by four simple plastic clips.

Using your hands or a special plastic tool, pry between the plastic spring and the bodywork to release the retaining clip. Perform the same operation on the remaining three clips.

You can now pull out the trim. To install the new trim, simply position it gently in its slot and press inward.

The four clips will lock automatically without further intervention. Check the correct position in the support.


Updated on 8 February 2026 by ScegliAuto


Related tutorials

Removal of the Windscreen Side Seal
Removal of the Windscreen Side Seal
Peugeot 406 (1995-2005 / MK 1) The side seal of the windscreen actually runs from the bottom edge of the glass to the inside of the rear door, along the roof. In addition to being …
Antenna Replacement for Peugeot 406
Antenna Replacement for Peugeot 406
Peugeot 406 (1995-2005 / MK 1) Let's replace the antenna support on a Peugeot 406. Remove the interior light or the car panel. Use a screwdriver to pry at the roof panel, lowering …
Replacing the Driver's Seatbelt
Replacing the Driver's Seatbelt
Peugeot 406 (1995-2005 / MK 1) To replace the driver's seatbelt, proceed as follows: remove the plastic cover from the side of the seat and unscrew the seatbelt's mounting bolt; re…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos