Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on a 2016 Peugeot Boxer

Model: Peugeot Boxer MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Engine oil

See other generations:
Video tutorial

Changing the oil yourself on a 2016 Peugeot Boxer is straightforward; the procedure consists of a few short steps. Follow these steps: - Open the front bonnet by pulling the lever located at the end of the dashboard on the driver's side; - Unscrew the oil filler cap; - Lift the vehicle with a jack to allow the oil to drain more quickly; - Unscrew the nut that secures the oil sump plug and let the engine oil drain out; - Remove the oil filter; - Insert a new oil filter; - Refit the oil sump plug; - Lower the vehicle to the ground; - Top up the oil in the reservoir; When performing this oil change, remember to take the used engine oil to a location where it can be disposed of properly.


Updated on 23 October 2026 by ScegliAuto


Related tutorials

How to reset the oil light on the Peugeot Boxer
How to reset the oil light on the Peugeot Boxer
Peugeot Boxer (1993-2006 / MK 1) If you own a first-generation Peugeot Boxer and the oil warning light on the instrument panel continues to stay on even after replacing the oil, do n…
How to change the oil in the 2016 Peugeot Boxer?
How to change the oil in the 2016 Peugeot Boxer?
Peugeot Boxer (2006-2024 / MK 2) In the 2016 Peugeot Boxer, you can perform an oil change yourself without spending on professional labour. Remember, however, that every time you cha…
How to Reset the Oil Warning Light on the Peugeot Boxer
How to Reset the Oil Warning Light on the Peugeot Boxer
Peugeot Boxer (2006-2024 / MK 2) To manually reset the oil warning light on the dashboard of your second series Peugeot Boxer, you do not need to visit a local garage. You can comple…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos