Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. Boxer
    4. : How to reset the oil indicator on the Peugeot Boxer?

Peugeot Boxer - Video tutorial

Model: Peugeot Boxer MK 2 - Years 2006-2023
Part: Instrument cluster
Operation: How to reset the oil indicator on the Peugeot Boxer?

To manually reset the oil light on your second-generation Peugeot Boxer, you don't need to go to a trusted workshop in your area. In fact, you just need to follow the following procedure to complete the operation independently and without any additional costs. First, enter the vehicle and simultaneously press the brake and accelerator pedals. Then, turn on the ignition of your Peugeot Boxer and wait for about 20 seconds. Finally, when the dashboard display stops flashing, turn off the vehicle and the procedure is complete.


Posted on 12 February 2024 by ScegliAuto

    Frequently Asked Questions

    • Boxer 2006-2023 - Why is the hill holder function no longer available on the Peugeot Boxer? Read Answer
    • Boxer 2006-2023 - How to reset the service on the Peugeot Boxer? Read Answer
    • Boxer 2006-2023 - What does the maintenance light on the Peugeot Boxer 2 indicate? Read Answer
    • Boxer 2006-2023 - What does the warning light on Peugeot Boxer signal? Read Answer
    • Boxer 2006-2023 - Where to find the list of warning lights on the Peugeot Boxer? Read Answer
    • Boxer 2006-2023 - What do the warning lights represent in the Peugeot Boxer? Read Answer
    • Boxer 2006-2023 - What are the warning lights on the Peugeot Boxer? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos