Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Peugeot Boxer

Model: Peugeot Boxer MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Service warning light

See other generations:
Video tutorial

Here is a short and clear video tutorial on the procedure to turn off the expired service warning on a Peugeot Boxer. Assuming that scheduled maintenance, such as engine oil and filter changes, has already been performed, do the following: press and hold the accelerator and brake pedals simultaneously, turn on the ignition, wait about fifteen seconds for the warning light on the dashboard to turn off, and then switch off the ignition.

To verify the alarm has been cleared, turn the ignition back on and check.


Posted on 29 May 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Peugeot Boxer 4?
How to Reset the Service Light on the Peugeot Boxer 4?
Peugeot Boxer (2006-2024 / MK 2) The operations to perform when discussing a service are essentially the oil and oil filter change of the engine, to which, depending on the vehicle's…
How do you reset the Service light on the Peugeot Boxer?
How do you reset the Service light on the Peugeot Boxer?
Peugeot Boxer (2006-2024 / MK 2) To reset the Service light on the instrument panel of the Peugeot Boxer, it is necessary to turn on the instrument panel by turning the ignition key:…
How do you reset the Service light on the Peugeot Boxer?
How do you reset the Service light on the Peugeot Boxer?
Peugeot Boxer (2006-2024 / MK 2) The Service light that is shown on the instrument panel of the Peugeot Boxer can be reset by turning on the instrument panel, turning the ignition ke…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos