Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Remote Battery on the Peugeot 3008

Model: Peugeot 3008 P84, MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Key

See other generations:
Video tutorial

In this video, you will see how to change the battery in the remote control of a Peugeot 3008/5008: you will need a small screwdriver to pry open one side of the remote. Once you have opened the casing (there is no need to remove the emergency key), you will see the battery, which you can pry out with the same screwdriver.

It is a common CR2032 battery that you can easily find for a few pounds at any supermarket. When reinserting the new battery, pay attention to the polarity, and after placing it back, you can snap the two halves of the remote casing together.


Updated on 25 October 2026 by ScegliAuto


Related tutorials

How to Change the Remote Battery on a Peugeot 3008
How to Change the Remote Battery on a Peugeot 3008
Peugeot 3008 (2009-2016 / MK 1, T84) To change the battery in the remote, start by pressing the button on the bottom of the remote to extract the key. Use a plastic wedge to pry open one…
How to Replace the Key Fob Battery in a Peugeot 3008
How to Replace the Key Fob Battery in a Peugeot 3008
Peugeot 3008 (2016-2023 / P84, MK 2) The procedure to replace the battery in the key fob of a Peugeot 3008 is very simple and quick. You will need a flat-head screwdriver and a flat CR 2…
How to Replace the Key Fob Battery on a Peugeot 3008
Peugeot 3008 (2016-2023 / P84, MK 2) Replacing the battery in the key fob of a Peugeot 3008 is a very simple and quick operation. You will only need a new battery of the correct model, w…

    Frequently Asked Questions

    • 3008 2016-2023 - What does the red warning light on the Peugeot 3008 wrench indicate? Read answer
    • 3008 2009-2016 - How to replace the battery in the key of a Peugeot 3008? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos