Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fit Roof Bars on a Peugeot 207

Model: Peugeot 207 MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Roof rack bars

Video tutorial

In this video, see how to fit universal roof bars on a Peugeot 207. Universal roof bars are used on cars with roof rails (fixed bar secured to the car roof) and without (specific slots in the bodywork of the roof). Fit the roof bar kit as shown in the video, calibrating the bars according to the width of the car. Place the brackets at both ends of the flaps in the slots on the car roof.

Once the width of the anchoring brackets is adjusted, tighten the pins with the butterfly bolt (if a lock is present) until fully secured to the car roof. Finally, apply safety caps on both sides.


Updated on 28 February 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light on a Peugeot 207
How to Replace the Rear Light on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Before you can start, open the tailgate of your Peugeot 207. Begin by moving the side carpet in the boot. Next, unscrew and remove the internal screw…
How to Replace the Front Headlamp on a Peugeot 207
How to Replace the Front Headlamp on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) How do you remove the front headlamp from a Peugeot 207? To remove the front headlamp, you first need to take off the front bumper. After unscrewing …
How to Replace the Key Battery on a Peugeot 207
How to Replace the Key Battery on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Start by pressing the top button of the electric key on your Peugeot 207 to extract the physical key. Next, using a flat screwdriver as a lever, uncl…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos