Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the clutch of the Peugeot 108?

Model: Peugeot 108 MK 1 - Years 2014-2021
Part: Clutch

In order to replace the clutch on the Peugeot 108, you first need to lift the car so that the front wheels are not in contact with the ground: they will then need to be removed by loosening the screws that attach them to the respective hubs. Once you have access to the gearbox, you can loosen the screws that attach it to the supports, so that you can also disconnect all the appropriate connectors. The clutch is located between the gearbox and the flywheel: at this point it can be removed, replaced with a new one, and all the components that were just removed can be reassembled.

Posted on 14 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Filter of the Peugeot 108
How to Replace the Cabin Filter of the Peugeot 108
Peugeot 108 (2014-2021 / MK 1) If you want to replace the cabin air filter of your Peugeot 108 yourself, follow these steps. First, enter the car and reach the passenger seat. Open…
How to replace the engine air filter of the Peugeot 108
How to replace the engine air filter of the Peugeot 108
Peugeot 108 (2014-2021 / MK 1) The replacement of the engine air filter of your Peugeot 108 is undoubtedly one of the simplest operations you can perform independently on the vehic…
How to replace the air filter of the Peugeot 108
How to replace the air filter of the Peugeot 108
Peugeot 108 (2014-2021 / MK 1) To correctly replace the engine air filter of your Peugeot 108, it only takes a few minutes. All you have to do is carefully read the following guide…

Other guides you may be interested in

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos