Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil light on the Peugeot 301

Model: Peugeot 301 MK 1 - Years 2012-2019
Part: Service warning light

If you own a Peugeot 301 and want to manually reset the oil light on the instrument panel even after changing the engine oil, all you have to do is read the following guide and follow the steps described. First, go inside the vehicle and locate the buttons below the instrument panel display. Then, press and hold the button located in the bottom left corner and start the instrument panel. Wait ten seconds for the oil light reset to complete and release the button.

Posted on 21 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil in a Peugeot 301
How to Change the Engine Oil in a Peugeot 301
Peugeot 301 (2012-2019 / MK 1) This guide shows how to change the engine oil in a Peugeot 301. After safely lifting the vehicle, unscrew the 16 mm cap to drain the oil pan. Use a c…
How to Change the Engine Oil in a Peugeot 301?
How to Change the Engine Oil in a Peugeot 301?
Peugeot 301 (2012-2019 / MK 1) To change the engine oil in a Peugeot 301, access the underside of the vehicle at the engine compartment: here you will find the oil drain plug, whic…
How do you reset the tire pressure warning light on the Peugeot 301?
How do you reset the tire pressure warning light on the Peugeot 301?
Peugeot 301 (2012-2019 / MK 1) In order to reset the tire pressure warning light of the Peugeot 301, you need to inflate the tires to the recommended pressure value: this value is …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos