Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil in a Peugeot 301?

Model: Peugeot 301 MK 1 - Years 2012-2019
Part: Engine oil

To change the engine oil in a Peugeot 301, access the underside of the vehicle at the engine compartment: here you will find the oil drain plug, which must be removed to collect the used oil in a properly positioned container. After the oil has completely drained, open the hood and remove the oil filter located directly in front of the engine block; once this filter has been replaced, you can top off by adding new oil into the designated fill opening in the engine compartment.

Updated on 16 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the oil light on the Peugeot 301
How to reset the oil light on the Peugeot 301
Peugeot 301 (2012-2019 / MK 1) If you own a Peugeot 301 and want to manually reset the oil light on the instrument panel even after changing the engine oil, all you have to do is r…
How to Change the Engine Oil in a Peugeot 301
How to Change the Engine Oil in a Peugeot 301
Peugeot 301 (2012-2019 / MK 1) .. This guide shows how to change the engine oil in a Peugeot 301. After safely lifting the vehicle, unscrew the 16 mm cap.. …
Replacing the Cabin Air Filter of the Peugeot 301
Replacing the Cabin Air Filter of the Peugeot 301
Peugeot 301 (2012-2019 / MK 1) Follow this guide to remove and replace the cabin air filter of the Peugeot 301. First, get inside the vehicle on the front passenger side and remove…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos