Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil in a Peugeot 301

Model: Peugeot 301 MK 1 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Engine oil

Video tutorial

This guide shows how to change the engine oil in a Peugeot 301. After safely lifting the vehicle, unscrew the 16 mm cap to drain the oil pan. Use a container to collect the used fluid. Unscrew the oil filter with a cup wrench and let the remaining oil drain out. Clean any residues and install the new filter cartridge after lubricating the seal.

Reinstall the oil pan cap and fill the reservoir. At this point, reset the warning light from the dashboard by holding down the trip reset button and turning on the ignition.


Updated on 12 June 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil in a Peugeot 301?
How to Change the Engine Oil in a Peugeot 301?
Peugeot 301 (2012-2019 / MK 1) To change the engine oil in a Peugeot 301, access the underside of the vehicle at the engine compartment: here you will find the oil drain plug, whic…
How to Replace the Radio in the Peugeot 301?
How to Replace the Radio in the Peugeot 301?
Peugeot 301 (2012-2019 / MK 1) To replace the radio in the Peugeot 301, pry underneath the trim that surrounds the radio display to detach it from its housing and disconnect the un…
How to Replace the Cabin Air Filter on a Peugeot 301?
How to Replace the Cabin Air Filter on a Peugeot 301?
Peugeot 301 (2012-2019 / MK 1) To replace the cabin air filter on a Peugeot 301, detach the plastic cover from the lower footwell on the passenger side: after removing this cover, …

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos