Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 3008
    4. : How to remove the air filter on Peugeot 3008

Peugeot 3008 - Video tutorial

Model: Peugeot 3008 MK 1, T84 - Years 2009-2016
Part: Air filter
Operation: How to remove the air filter on Peugeot 3008

Let's see how to remove the air filter on Peugeot 3008: open the car door, pull up the engine compartment opening lever at the bottom left of the dashboard and lift up the front hood, secure it with the rod. We remove the soundproofing panel of the engine, with a screwdriver we unscrew the air pipe (we disconnect the engine air intake pipe and the pin of the metal clamp). Unscrew the filter box cap, extract the worn air filter and insert a new one making it adhere well around the walls. Finally we reassemble the cap of the air box and all the other pieces. We close the front hood finally.


Posted on 20 October 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 3008 2016-2023 - Where is the cabin filter located, in the Peugeot 3008? Read Answer
    • 3008 2009-2016 - Where is the Peugeot 3008 air filter located? Read Answer
    • 3008 2016-2023 - Where is the pollen filter on my paugeot 3008? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos