Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you disassemble the rear taillight of the Peugeot 2008 mk2?

Model: Peugeot 2008 MK 2 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Tail light

See other generations:
Video tutorial

The Peugeot 2008 mk2 is the car shown in the video above, of which we will now describe the procedure for replacing the rear light, a job aimed not only at remedying damage caused by impact, but also at applying upgrades, etc. It starts with opening the rear hatch, then locating the access panel in the interior trim to be removed, unscrewing the fixing pin, always internal, of the optical group, freeing it and removing it from the outside.

To complete, disconnect the electrical cable connectors, so you can install the new light.


Posted on 23 March 2025 by ScegliAuto


Related tutorials

How to Remove the Rear Light and Replace the Bulbs on Peugeot 2008
How to Remove the Rear Light and Replace the Bulbs on Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) Are the rear light bulbs on your Peugeot 2008 not working anymore? Follow this guide to remove the light and replace the bulbs: open the boot lid, re…
How to Replace the Rear Light Unit on a Peugeot 2008
How to Replace the Rear Light Unit on a Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) To replace the rear light unit on a Peugeot 2008, place the car on a lift or on a stable surface. Now, open the boot at the rear and inside the boot,…
How to Replace the Headlight Bulbs on a Peugeot 2008
How to Replace the Headlight Bulbs on a Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) How do you replace the bulbs in the rear light of a Peugeot 2008? This operation is very simple. Open the boot lid, then remove the fabric cover loca…

    Frequently Asked Questions

    • Peugeot 2008 2019-2026 - How to disassemble the rear light of the Peugeot 2008? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos