Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. 2008
  6. : How to replace headlight bulbs on peugeot 2008

Peugeot 2008 - Video tutorial

Model: Peugeot 2008 MK 1 - Years 2013-2019
Part: Rear light bulb
Operation: How to replace headlight bulbs on peugeot 2008

How to replace the bulbs located in the rear light of a Peugeot 2008? Very simple operation, we see in this video how to proceed: we open the hood of the luggage compartment, then, we remove the cloth cap placed on the side trim of the luggage compartment. Unscrew the plastic locking nuts of the rear light, disconnect the power supply terminals connected to the light and pull it away from its seat. We replace damaged bulbs with new ones (same voltage) on hand. We reassemble the headlight with the respective tightening nuts, replace the inspection cap and finally test the correct functioning of the lights.


Posted on 27 October 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos