Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Peugeot Boxer?

Model: Peugeot Boxer MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Checks and maintenance

See other generations:
Video tutorial

The Service light that is shown on the instrument panel of the Peugeot Boxer can be reset by turning on the instrument panel, turning the ignition key in the ignition switch: once the panel is turned on, you will need to hold down the accelerator and brake pedals simultaneously for a few seconds.

Then, while keeping them pressed, you will need to turn off the instrument panel: once the panel is turned off, you can release both pedals.

Finally, you can turn on the instrument panel again, in order to verify that the reset of the light has occurred.


Posted on 16 April 2025 by ScegliAuto


Related tutorials

How to Reset the Service Light on Peugeot Boxer?
How to Reset the Service Light on Peugeot Boxer?
Peugeot Boxer (2006-2024 / MK 2) To reset the service light on the Peugeot Boxer, simultaneously press the accelerator and brake pedals. While holding the pedals down, insert the ign…
How to Reset the Service Light on the Peugeot Boxer 4?
How to Reset the Service Light on the Peugeot Boxer 4?
Peugeot Boxer (2006-2024 / MK 2) The operations to perform when discussing a service are essentially the oil and oil filter change of the engine, to which, depending on the vehicle's…
How to Reset the Service Light on a Peugeot Boxer?
How to Reset the Service Light on a Peugeot Boxer?
Peugeot Boxer (2006-2024 / MK 2) To reset the Service light on the Peugeot Boxer, turn on the ignition by turning the key. Once the instrument cluster is on, press and hold the accel…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos