Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter on a Peugeot 208

Model: Peugeot 208 MK 1, A9 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Cabin air filter

See other generations:
Video tutorial

The cabin air filter (which actually consists of two panels) is located in the engine compartment, on the passenger side, just below the windscreen: once the front bonnet is opened, locate the triangular plastic grille and unclip the three front tabs to lift and remove it; at this point, behind the strut dome, you will see the two filters that need to be extracted, remove any dirt residue and insert the new ones, ensuring the correct airflow direction; it is also advisable to sanitise the cabin when replacing the filters.


Updated on 3 March 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter on a Peugeot 208?
How to Replace the Cabin Filter on a Peugeot 208?
Peugeot 208 (2012-2019 / MK 1, A9) To replace the cabin filter on a Peugeot 208, open the bonnet to access the components inside the engine bay: just below the windscreen, on the passe…
How to Replace the Cabin Filter on a Peugeot 208?
How to Replace the Cabin Filter on a Peugeot 208?
Peugeot 208 (2012-2019 / MK 1, A9) To replace the cabin filter on a Peugeot 208, open the bonnet to access the grille located at the top of the engine bay, just below the windscreen. B…
How do you replace the cabin filter of the Peugeot 208?
How do you replace the cabin filter of the Peugeot 208?
Peugeot 208 (2012-2019 / MK 1, A9) It will be possible to replace the cabin filter of the Peugeot 208 by opening the hood, so that access can be gained to the panel located at the base…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos