Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the battery of a Peugeot Partner

Model: Peugeot Partner Tepee B9 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Battery

See other generations:
Video tutorial

In this helpful video, we see how to disassemble the battery of a second series Peugeot Partner. First, we need to remove the red plastic cover of the battery, then with a 13mm wrench, we unscrew the two nuts of the positive terminal clamps and remove the two cables as shown in the video.

Now, we lift the cover on the left of the terminal and lift the locking tab to remove it. After that, with a small flathead screwdriver, we release the support tab of the battery compartment above the battery and remove it. Then, we lift and remove the battery cover, now, with an 8mm wrench, we remove the negative terminal clamp, finally with a 10mm wrench, we unscrew and remove the fixing plate on the left of the battery in order to extract it from its seat.


Posted on 2 July 2025 by ScegliAuto


Related tutorials

How to Remove the Door Panel of a Peugeot Partner
How to Remove the Door Panel of a Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) Before you start, open the front door of your Peugeot Partner. Begin by disengaging and removing the main insert of the door panel, using a thin but …
How to Replace the Key Battery of a Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) Start by pressing the silver button on top to open the physical key of your Peugeot Partner. Next, insert the tip of a small flathead screwdriver int…
Replacing the coolant temperature sensor on the Peugeot Partner
Replacing the coolant temperature sensor on the Peugeot Partner
Peugeot Partner Tepee (1996-2013 / MK 1) Today's guide will show you the procedure for removing and replacing the coolant temperature sensor on the Peugeot Partner. First, open the bonnet an…

Where to Find and How to Remove the Spare Wheel of a Peugeot 5008?

The spare wheel of a Peugeot 5008 is located under the rear of the vehicle. To remove it, you need to lift the third row of seats to access the fixing bolt that holds the spare wheel in position. Using the correct spanner, proceed to unscrew the fixing bolt until the wheel is no longer secured. At this point, you can extract the spare wheel from underneath the vehicle. Once you have completed this step, you are free to fit the spare wheel. Ensure you correctly remount the spare wheel and securely tighten the fixing bolt when you are finished.

Watch the video!


by ScegliAuto

More videos