Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 206
    4. : How to replace the engine oil filter on a Peugeot 206

Peugeot 206 - Video tutorial

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Oil filter
Operation: How to replace the engine oil filter on a Peugeot 206

How to replace the engine oil filter on a Peugeot 206. Let's see in this video guide how to proceed with the replacement: open the car door and pull up the engine compartment opening lever located at the bottom left of the dashboard and lift up the front hood, put safely the same. With a chain wrench we unscrew the large oil filter; unscrew the drain pin of the oil pan (let the used oil flow into a container) and finally screw it back on. We mount a new filter in the dedicated housing making it adhere well around the metal walls. We reassemble the pin of the oil pan and top up the engine. We close the front hood after maintenance.


Posted on 29 October 2023 by ScegliAuto



Replacement of the engine oil and oil filter of the Peugeot 206 1.1
Peugeot 206 (1998-2012 / MK 1) Today we will discover the procedure that will allow us to perform the routine maintenance service, replacing the engine oil and oil filter, of the P
Change Peugeot 206 1.1 oil
Peugeot 206 (1998-2012 / MK 1) Let's see how to change the engine oil on Peugeot 206. We raise the front hood to remove the oil filter. We lift the car on a column or jack bridge,
Replacing the oil filter on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Replacing the oil filter on a Peugeot 206? Let's see how to remove it from inside the engine compartment. We lift the bonnet and put it in safety, th

Other guides that may interest you

    Frequently Asked Questions

    • 206 1998-2012 - Where is the Peugeot 206 oil filter located? Read Answer

How do you reset the tire pressure warning light on Hyundai I10?

In order to reset the tire pressure warning light on the Hyundai I10 there is no procedure that can be carried out independently. First of all, the flat tires must be returned to the correct inflation pressure, indicated on the sticker stuck in the driver's door pillar. Once the tire in question has been inflated, a diagnostic tool can be connected to the vehicle's OBD port so that the error can be reset. By following the procedure indicated in the tutorial, it will be possible to reset the warning light and turn on the ignition to check that everything has been done correctly.

Watch the video!


by ScegliAuto

More videos