Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the third brake light bulb on the Peugeot

Model: Peugeot Peugeot Various
Part:

Today we will explain how to replace the third brake light on a Peugeot vehicle. To perform this operation, we need to open the trunk of the car and push outwards the bar located in the central part of the tailgate, in order to make the light come out from the outside. Disconnect the connector from the bulbs and insert the new bulbs. Place the light in its housing and make sure that the internal bar is securely in place before closing the trunk. Check the functioning of the lights by turning on the vehicle, and if they do not work, check the corresponding fuse.

Posted on 21 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to deactivate the start and stop on the Peugeot
How to deactivate the start and stop on the Peugeot
Peugeot Peugeot Various If we want to deactivate the start and stop system on this car permanently, we can find the trick by following the instructions in the description be…
How to activate Peugeot start and stop.
How to activate Peugeot start and stop.
Peugeot Peugeot Various If our car model is equipped with the start-stop system, in the description below we will find instructions and the procedure to follow to activate t…
How to replace the electric handbrake button on Peugeot 5008 and 3008 vehicles
How to replace the electric handbrake button on Peugeot 5008 and 3008 vehicles
Peugeot Peugeot Various Today we will illustrate the steps to replace the electric handbrake button of Peugeot 3008 and 5008 vehicles. The first step is to remove the gear s…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos