Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to calibrate the AISIN gearbox of a Peugeot 508 after changing the automatic transmission oil

Model: Peugeot 508 MK 2 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Transmission

See other generations:
Video tutorial

In this video we can see how it is necessary, after changing the oil of the automatic gearbox on the Peugeot 508, to calibrate the AISIN gearbox, so that the gearbox learns the position of "N". The oil of the automatic gearbox, in fact, loses its lubricating properties with use and may contain residues that alter its operation.

Replacing it restores optimal conditions, and for this reason calibration is required, so that the control unit memorizes the operating parameters and adapts them over time.

The calibration is performed by re-teaching the gearbox the position of "N" and then inserting the various positions, as shown in the video.


Posted on 18 August 2025 by ScegliAuto


Related tutorials

How to Replace the Automatic Transmission Oil in the Peugeot 508
How to Replace the Automatic Transmission Oil in the Peugeot 508
Peugeot 508 (2010-2018 / MK 1) This guide outlines the steps to replace the oil in the EAT6 automatic transmission, which also applies to the EAT8, of the Peugeot 508; the manufact…
How do you reset the automatic gearbox of the Peugeot 508?
How do you reset the automatic gearbox of the Peugeot 508?
Peugeot 508 (2018-2026 / MK 2) To reset the automatic gearbox of the Peugeot 508, it is necessary to turn on the instrument panel by inserting the appropriate key into the ignition…
How to Reset the Automatic Gearbox of the Peugeot 508?
How to Reset the Automatic Gearbox of the Peugeot 508?
Peugeot 508 (2010-2018 / MK 1) The reset procedure for the automatic gearbox on the Peugeot 508 involves turning on the ignition by turning the key in its corresponding lock: once …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos