Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on a Peugeot 208

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Timing belt

To replace the timing belt on a Peugeot 208: lift the car on a column lift (jack), remove the front wheel, use a screwdriver to detach the right wheel arch liner and remove the timing belt cover. Once these steps are completed, lift the bonnet, remove the engine soundproofing panel, and use a spanner to loosen the tensioner pulley and slide the belt off. After fitting the new belt, use the spanner to tension the tensioner pulley until the correct tension is achieved on the belt (previously fitted). Finally, check the tensioner and the belt itself, and tighten everything with a socket wrench.

Updated on 7 March 2026 by ScegliAuto

Video tutorial

Related tutorials

When to Replace the Timing Belt on the Peugeot 208?
When to Replace the Timing Belt on the Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) The timing belt synchronises the operation of the crankshaft with the camshaft (which controls the movement of valves and pistons) and, in some cases…
Timing Belt Replacement on Peugeot 208
Timing Belt Replacement on Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) Remove the timing belt on the Peugeot 208 if you have exceeded the maximum mileage for safety. Here’s how to remove the belt. Lift the front bonnet; …
How do you replace the timing belt of the Peugeot 208?
How do you replace the timing belt of the Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) To replace the timing belt of the Peugeot 208, you need to lift the car with a jack or a lift, so that the front right wheel is not in contact with t…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos